|
|
Light Commercial & Clusters
3500 DiPS Specifications
Skid
- Structural Poly Base 3' x 4' (submersible pumps)
- Fully assembled base weight under 110 lbs (using submersible pumps)
- Major components fully integrated and secured
- 12 hour Dosing capacity - 3,500 gallons +
- All major components can be isolated for removal
- Only four plumbing attachment points required
- Terminal Strip in Control Panel for all external wiring
Major Components
- TEI Controls DICP 06-1x26 control panel
- Advanced Cleaning Technology "ACT II" 100 Micron Filtration System
- Myers Pentair High Head Filtered Effluent Pumps (submersibles)
- Myers "Quick Prime" centrifugal pumps (requires foot-valve)
- ARAD 1½" axial turbine digital flow meter
- Electric Throttling field flush valve
- Murphy 2" Swichgage differential pressure switch
- Optional Cover (outdoor installations)
DICP 06-1x26 Control Panel & "ACT II" Filter Unit
Major Components
- Black/White Touch Screen Operator Interface Console (OIC) w/Enhanced Features
- Automation Direct DL-06 PLC
- Isolation boards with HOA & LED for outputs and inputs
- Horse Power rated contactors (submersibles) and starters (centrifugals)
- Optional - telephone (radio) modem with cable (antenna)
Operator Interface Console (OIC)
- Adjusts screens to number of filters and zones
- Easy-to-navigate, black & white, pictorial, touch screen
- Separate control screens for zones, filters, pumps
- Allows full control of all operating parameters
- Provides access to data logs and meters
Automation Direct DL-06
- PLC SCADA ready with RS232 port
- PLC fully integrated to OIC
- All OIC functions integrated for SCADA control
- External digital input circuits use 24Vdc
- PLC fully programmed to support:
Float Operation
- four float system used on holding tank level
- float failure detection and alarming
- continuous operation with one failed float
- high and low level alarm call out
- high duty logic to increase dosing
- float HOA's allow manual system tests
Pump Operation
- two pump alteration logic
- automatic removal of failed pump
- Fail-To-Run and Fail-To-Produce-Flow alarm logic
- automatic cutoff if no zone is available for dosing
- hardware & software HOA on pumps
- elapsed run time (displayed on OIC)
Zone Operation
- up to 6 zones operated automatically
- software and hardware HOA for each zone
- zone failure detection and removal from AUTO
- zone dosing controlled by time or gallons
- automatic field flush of zones
- operator adjusted dosing time for each zone
- operator adjusted dosing quantity for each zone
- operator adjusted rest time for each zone
- operator accessible zone elapsed dosing time
- operator accessible zone cumulative dosed gallons
Dual Filter Operation
- 2 filter units operated automatically with filtered water
- flushes initiated by hand, time or backpressure
- operator adjusted backpressure setting
- operator adjusted dosing time between flush
- hardware HOA for each filter unit
Alarm Outputs
- high level
- pump Fail-to-run
- pump lack of flow
- zone lack of flow
- float switch failure
2003 - 2006 SURFLO Soil Absorption Systems, all rights reserved.
Last update: 12/8/2005
|
